|
|
Analysis of Defects on PCB Using Modern Optical Method
Vala, Martin ; Řezníček, Michal (referee) ; Řihák, Pavel (advisor)
This diploma thesis is focused on detecting of defects on BGA (Ball Grid Array) components using of X-ray. Defects are formed during reflow BGA components during assembly, but also later due to mechanical and thermal stress. Therefore, there is an overview of defects and methods of diagnosis of BGA packages eg .: modern X-ray defect detection or micro sections. There is disclosed a device NORDSON DAGE XD7600NT its operation and setup. The device enables advanced methods of scanning called X-plane. For creating 3D models used reconstructive software called CERA, which uses raw data from the method of X-Plane.
|
|
|
Investigation of Reliability for Solder Joints in Nitrogen Atmosphere
Vala, Martin ; Adámek, Martin (referee) ; Szendiuch, Ivan (advisor)
This thesis examines the influence of nitrogen atmosphere on the quality of the solder joint lead-free solder paste. For the solder paste were measured and set temperature profiles. Thesis includes the implementation and measurement of samples in a protective nitrogen atmosphere and without a protective atmosphere. These measurements are compared, and the conclusions were drawn for the influence of nitrogen atmosphere. The reliability and the quality of the soldered joints were investigated.
|
|
|
Investigation Of Influence Nitrogen Atmosphere On The Spreadability And Reliability Of Solder Joints
Vala, Martin
This article examines the impact of nitrogen atmosphere on the quality of the solder joint. For tests were used two lead-free solder pastes, specifically SAC305 and SN100C. These pastes were printed on a substrate FR4 with ENIG finish with semiautomatic devices. For reflow of paste was used specially modified desiccator. This device has hot plate with the cooling system. This system is active after reflow. In this device, it was possible to create around the solder paste a nitrogen atmosphere having defined content of residual oxygen. This experiment determined the most appropriate concentration of the protective gas atmosphere to obtain the greatest wettability and spreadability of paste, which is a prerequisite for a good solder joint.
|
|
|
Analysis of Defects on PCB Using Modern Optical Method
Vala, Martin ; Řezníček, Michal (referee) ; Řihák, Pavel (advisor)
This diploma thesis is focused on detecting of defects on BGA (Ball Grid Array) components using of X-ray. Defects are formed during reflow BGA components during assembly, but also later due to mechanical and thermal stress. Therefore, there is an overview of defects and methods of diagnosis of BGA packages eg .: modern X-ray defect detection or micro sections. There is disclosed a device NORDSON DAGE XD7600NT its operation and setup. The device enables advanced methods of scanning called X-plane. For creating 3D models used reconstructive software called CERA, which uses raw data from the method of X-Plane.
|
|
|
Investigation of Reliability for Solder Joints in Nitrogen Atmosphere
Vala, Martin ; Adámek, Martin (referee) ; Szendiuch, Ivan (advisor)
This thesis examines the influence of nitrogen atmosphere on the quality of the solder joint lead-free solder paste. For the solder paste were measured and set temperature profiles. Thesis includes the implementation and measurement of samples in a protective nitrogen atmosphere and without a protective atmosphere. These measurements are compared, and the conclusions were drawn for the influence of nitrogen atmosphere. The reliability and the quality of the soldered joints were investigated.
|
guest ::
